SRM Portable
LEGENDARY
Live Sound


The Mackie SRM is the most widely used portable loudspeaker ever. It’s unparalleled ease-of-use, professional sound quality and indestructible portability has made it a live sound legend. Now with more power and flexibility than ever, SRM is the ultimate portable PA system.



BEYOND
Proven


The 1000W SRM350 and SRM450 feature modern tools like application-specific speaker modes and an automatic feedback destroyer, each with a single-button interface that gets you optimized performance in just seconds. And with the integrated 2-channel mixer, you can easily mix multiple sources. Complete your SRM system with the 1200W SRM1550 subwoofer, packed with plenty of power and versatility to match SRM loudspeakers perfectly. The SRM Portable Series is beyond powerful and provides an array of modern features making these the easiest to use, best sounding SRMs ever. 

Thump Series
LOW END
YOU CAN FEEL


Only Mackie Thump Powered Loudspeakers deliver the class-leading, chest-thumping low end you deserve. With 1000+ watts of power, you get the high output you need in a package that’s tough, lightweight and portable.



GET LOUDER.
GET LOWER.


Thump Series loudspeakers deliver more than twice the power of the previous generation. Plus, we’ve upped the amazing amount of low end Thump delivers. High-output, more bass and they are still as affordable as ever. Featuring a built-in 3-band EQ and designed by the world’s leader in portable sound, Thump delivers power, performance and proven quality.

Mackie Thump12

1,000 watts of high-output power in a portable package
12" low-frequency driver and 1.4" titanium dome compression driver
Integrated precision crossover and transducer time alignment deliver outstanding sound quality
3-band EQ with sweepable mid-frequency for tone shaping
Mic/line input for direct connection of a single microphone
Built-in limiter for system protection
Compact and lightweight for easy setup and transport
Housed in a tough, impact-resistant polypropylene enclosure


Class D Fast Recovery amplifier provides chest-thumping power

The Thump12 pumps out a massive amount of sound for its size. The Thump12's 2-way ported design generates ample quantities of bass, and its 1.4" titanium dome compression driver ensures even, wide dispersion. Class-D Fast Recovery amplification pushes plenty of power to the high-frequency compression driver and high-output woofer


Crossovers and transducer time alignment deliver outstanding sound quality

The Thump12 divides high and low frequencies using a precision 2-way crossover, while also time aligning the signals so that your audience hears low and high frequencies in sync. You can also use the Thump12's 3-band EQ to further shape your tone, making your kick drum thump and your hi-hats sizzle, or correcting acoustic anomalies in a less-than-perfect venue.


Ultra-compact design for easy setup and transport

Weighing in at 29 lbs., the Thump12 is compact and lightweight, making it easy to transport. The Thump12's small, portable size will ensure that you won't injure yourself while mounting it on a pole or packing it into your car. By the way, the Thump12 is housed in a tough, impact-resistant polypropylene enclosure, so don't think that its light weight makes it fragile!

Mackie SRM1550


Complete your Mackie SRM system with the 1200-watt SRM1550 subwoofer, packed with plenty of power and versatility to match SRM loudspeakers perfectly. Only Mackie SRM delivers this level of power and sound quality in such an indestructible, portable package.

The most widely used portable loudspeakers ever, Mackie SRM series speakers deliver unparalleled ease-of-use, professional sound quality and indestructible portability. SRMs feature modern tools such as High Pass Mode with frequency selection, perfect for pairing with the SRM1550 sub


1200W of power paired with a 15" custom high-output woofer with 3" voice coil delivers gig-level volumes with room to spare
Same cosmetic design as the renowned SRM450
Road-ready "built-like-a-tank" design
18 mm internally reinforced poplar cabinet and steel grille
Front ported for maximum low-frequency extension and punch
Stereo XLR inputs plus stereo XLR full-range and high-pass outputs
Integrated digital crossover with variable control and presets for Mackie SRM350 and SRM450 loudspeakers
Smart Protect™ DSP kicks in to protect your investment when things get pushed a little too hard
Built-in cup for easily pole-mounting full-range loudspeakers
Extremely portable design weighing only 65.6 lbs (29.7 kg)

Mackie Thump15


1,000 watts of high-output power in a portable package
15" low-frequency driver and 1.4" titanium dome compression driver
Integrated precision crossover and transducer time alignment deliver outstanding sound quality
3-band EQ with sweepable mid-frequency for tone shaping
Mic/line input for direct connection of a single microphone
Built-in limiter for system protection
Compact and lightweight for easy setup and transport
Housed in a tough, impact-resistant polypropylene


Class-D Fast Recovery amplifier provides chest-thumping power

The Thump15 pumps out a massive amount of sound for its size. The Thump15's 2-way ported design generates ample quantities of throbbing bass, and its 1.4" titanium dome driver ensures even, wide dispersion. Class D Fast Recovery amplification pushes plenty of power to the high-frequency compression driver and high-output woofer.


Crossovers and transducer time-alignment deliver outstanding sound quality

The Thump15 divides high and low frequencies using a precision 2-way crossover while also time aligning the signals so that your audience hears low and high frequencies in sync. You can also use the Thump15's 3-band equalizer to further shape your tone, making your kick drum thump and your hi-hats sizzle, or correcting acoustic anomalies in a less-than-perfect venue.


Portable design for easy setup and transport

Weighing in at just over 33 lbs., the Thump15 is compact and lightweight, making it easy to transport. The Thump15's small and portable size will ensure that you won't need a road crew to mount it on a pole or pack it into your car. By the way, the Thump15 is housed in a tough, impact-resistant polypropylene enclosure, so don't think that its light weight makes it fragile!



Mackie SRM450v3

Ultra-Wide Dispersion Ever been to a show where the music sounds great in front, but craps out once you get to the back or sides of the room? Mackie has, and that's why they gave the SRM450 a multi-cell horn throat aperture. Sure, it's hard to say, but what it does is allow for much wider and more even dispersion of high and mid frequencies -- so the wallflowers get the same great listening experience as those up front.

Timing is Everything In most loudspeakers, the compression driver that reproduces mid and high-frequencies is located deep inside the enclosure, while the low-frequency driver is much closer to the front of the enclosure. With this setup, bass arrives at listeners' ears sooner than treble, muddying the sound. Mackie remedied these unfortunate laws of physics with high-zoot electronics which allow precise alignment among the system components with zero signal degradation.

Better Than Your Average Box Anyone with a factory can build a box and stick some speakers in it (and that's just what many do). But low-frequency transducers in square boxes can create resonances that reflect off the rear wall and pass through the woofer cone out of phase, and ready to mess up your sound. The SRM450 enclosure is an asymmetrical monoloque design with no parallel surfaces, causing mid and high frequency resonances to be reflected at angles into internal damping materials, instead of interfering with the woofer doing its thing.

Dual FR Series Amplifiers Let's face it, 99 percent of the time compact PA speakers are cranked to the max. That's why the SRM450's beefy internal amplifier section features dual FR series amps -- one for each driver -- both designed for extreme output. The amp section is built around a huge toroidal transformer, massive storage capacitors, and state-of-the-art output transistors, all adding up to superior sound, night after night.

Servo Feedback Controlled LF Transducer for Stunning Bass Based on Mackie's award-winning HR824 studio monitor technology, the servo feedback damping electronic circuit within the SRM450 provides amazing results. The circuit "locks" the woofer in place with the positive and negative outputs of the amplifier in a way that no external amp and passive woofer can ever achieve. This creates a solid direct-coupling that delivers extremely deep bass from a small cabinet.

Superb Floor Monitor When the first warranty cards came back, Mackie noticed that a lot of folks were raving about what a great floor monitor the SRM450 made. Okay, it's super accurate. And it's designed to be tilted. But there had to be more reasons than that.



1000W system power with 12" high-output LF driver and 1.4" titanium dome compression driver
High-Definition Audio Processing for professional sound with unmatched clarity
Precision 2-way crossover, driver time alignment, and phase correction for easy set up no matter the venue
One-button speaker mode selection for application-specific voicing, get the sound you need
Eliminate feedback with one-button automatic feedback destroyer
2-channel mixer features dual Mackie Wide-Z inputs to easily handle your mics or instruments
Includes stereo RCA inputs for easy connection to MP3 player or drum machine
Smart Protect DSP protects your speakers from damage when you get loud
Monitor angle and voicing mode for easy stage monitoring
Great for install or portable systems
Weighs in at only 37 pounds!

Pleasantville Music Shoppe

Mackie SRM350 Features:

1,000-Watt system power paired with custom transducers deliver gig-level volumes with room to spare

10" high-output LF driver
1.4" titanium dome compression driver

High-Definition Audio Processing for professional sound with unmatched clarity

Patented acoustic correction developed with touring geniuses at EAW®
Precision 2-way crossover
Driver time alignment and phase correction

Quick one-button Speaker Mode selection for application-specific voicing (PA, DJ, Monitor and Soloist)
Effortlessly eliminate nasty feedback with one-button automatic Feedback Destroyer
Integrated 2-channel mixer featuring dual Mackie Wide-Z™ inputs

Handles anything from mics to guitars to mixers with a single twist of the gain knob
Includes stereo RCA inputs for easy connection to music source
Great for the singer/songwriter, plug in and leave the mixer at home

Smart Protect™ DSP kicks in to protect your investment when things get pushed a little too hard
Monitor-specific angle and voicing mode perfect for cutting through onstage
Flyable for permanent install, both vertically and horizontally
Proven highly-durable, portable design
Weight: 23.0 lbs. (10.4 kg)


Application-Specific Speaker Modes

Choose between four different speakers modes to optimize your SRM for the application at hand.

PA – Flat, perfect for mains
DJ – The perfect bump in lows and highs for max impact
Monitor – Add clarity and more gain before feedback
Solo – Perfect for acoustic and vocal-only applications


Automatic Feedback Destroyer

Get rid of nasty feedback for fearless performances with a single button push
Instant assessment and correction of feedback with up to four incredibly narrow 1/16th octave filters


Flexible 2-Channel Mixer

2 Mackie Wide-Z™ inputs offer flexible connection options and ultra-wide gain range
Stereo RCA input for smartphones, laptops
XLR thru with source options for connecting to other speakers


Est. 1938

Mackie Thump18S Features:

1,200-watt total system power
Professional band-pass design for maximum output and deep, room-filling lows
18" custom high-output woofer
Cool-running Class-D amplification
Precision crossover (140 Hz)
Tuning filters deliver highly accurate bass response
Robust system protection
Dual XLR inputs for mono or stereo applications
Stereo high-pass outputs optimize sound when connecting top boxes
Stereo full-range outputs perfect for adding more subwoofers
User-adjustable level and polarity controls
Easily mount your full-range loudspeaker via pole cup
"Built-Like-A-Tank" all-wood enclosure with high-durability finish
Weight: 82 lbs. (37.2 kg)


              

Only Thump loudspeakers deliver the proven chest-thumping performance you (and your audience) deserve. Now with Mackie's dynamic bass response technology, you get the deep, hard-hitting lows you've come to expect from Thump at any volume level.

Really bring the bass by adding the 1,200-watt Thump18S powered subwoofer. The powerful 18" sub is a professional band-pass design, delivering high-output and deep, rich lows that completely fill the room.


Portable speakers need to be flexible. They can be used as a main one day and a stage monitor the next.  With Thump, you've got everything you need to get the job done. The built-in 3-band EQ features a sweepable mid, perfect for dialing in the sound to fit the application. The lightweight design is easy to get up on a tripod or atop a sub.